Contents
The blinking blue light on Deco indicates that the device is ready for setup. It is a signal that it is searching for a connection and waiting to pair with other devices.
Once the setup process is complete, the light should become solid or change to a different color to indicate a successful connection.
Credit: routerleds.com
Understanding The Deco Blinking Blue Led
In this blog post, we will explore what the blinking blue LED on your
Deco WiFi extender means. We will discuss the possible reasons for the
blinking blue light, the different light colors of the extender, and how
to check the Deco’s LED status.
What Does It Mean If My Deco Is Flashing Blue?
When your Deco WiFi extender is flashing blue, it indicates that the
device is ready for setup. If you have recently completed the setup
process and the Deco is still flashing blue, it could indicate an issue.
It is recommended to double-check the setup or seek technical assistance
for further troubleshooting steps.
Why Is My Wifi Extender Blinking Blue?
A WiFi extender blinking blue typically means that the extender is
searching for a network analyzer. During this process, the extender is
attempting to establish a connection with the WiFi network by sending
measurement data. Once the extender successfully connects, the LED light
may turn into a static green color, indicating a stable connection.
What Do The Different Light Colors Of The Extender Mean?
The different light colors of the extender indicate various status
conditions. Here are the most common colors and their meanings:
| Color | Meaning |
|---|---|
| Yellow | The Deco unit is starting up |
| Blue pulse | Deco is ready for setup |
| Blue solid | Deco is setting up |
| Green solid | Deco is registered and connected |
Checking The Deco’s Led Status
To check the LED status of your Deco WiFi extender, you can refer to the
following steps:
- Locate the LED indicator on the Deco device.
- Observe the color and pattern of the LED light.
- Refer to the table above to understand the corresponding status.
- If you encounter any issues or need further assistance, consult the
user manual or reach out to technical support for guidance.
Credit: www.ebay.com
Troubleshooting The Deco Blinking Blue Led
If you’re experiencing issues with your TP-Link Deco flashing a blue light, don’t worry. This blog post will guide you through troubleshooting steps to solve the problem. Whether you need to reset your Deco, fix the issue of the flashing blue light, or configure the Deco to work in wireless mode, we’ve got you covered.
How To Reset Deco?
If your TP-Link Deco is acting up and you need to start fresh, resetting it might be the solution. Here’s how you can reset your Deco:
- Locate the reset button on your Deco device. It is typically found at the back or bottom.
- Using a pin or paperclip, press and hold the reset button for about 10 seconds.
- The LED lights on your Deco will start blinking rapidly, indicating that the reset is in progress.
- Once the LED lights stop blinking and become solid, your Deco has been successfully reset.
How To Fix The Issue Of Tp-link Deco Flashing Blue Light?
If your TP-Link Deco is continuously flashing a blue light, it means that it is ready for setup. However, if you have already completed the setup process and the Deco is still flashing blue, follow these steps to fix the issue:
- Make sure that your Deco is connected to power and that the power adapter is properly plugged in.
- Check the Ethernet cable connection between your modem and the Deco. Ensure that the cables are securely connected.
- Restart your modem and Deco by unplugging the power cables, waiting for a few seconds, and then plugging them back in.
- If the issue persists, try resetting your Deco following the steps mentioned earlier.
How To Configure The Tp-link Deco To Work In Wireless Mode?
If you want to configure your TP-Link Deco to work in wireless mode, follow these steps:
- Download and install the “Deco” app from the App Store or Google Play Store on your mobile device.
- Open the Deco app and create a TP-Link ID if you don’t have one already.
- Tap the “+” icon on the app’s main screen to add a new Deco device.
- Follow the on-screen instructions to connect your Deco device to power and your modem.
- Once the Deco device is connected, the app will prompt you to configure it. Follow the app’s instructions to set up your Deco network.
- During the setup, you can choose to set up the Deco network in wireless mode.
By following these steps, you can troubleshoot the blinking blue LED issue, reset your Deco when needed, and configure it to work in wireless mode. Enjoy seamless connectivity and a hassle-free networking experience with your TP-Link Deco!
Understanding The Deco Led Status
The blinking blue light on your Deco LED status indicates that the device is ready for setup or attempting to establish a connection. Ensure you follow the correct setup instructions for a successful configuration.
Understanding the Deco LED Status
When it comes to setting up your Deco device, it’s important to understand the LED status lights and what they signify. This will help you troubleshoot any potential issues and ensure a smooth setup process. In this article, we will focus on the different LED status lights of the Deco device, including yellow pulse, yellow solid, blue pulse, blue solid, and green solid. Let’s dive into each LED status in detail.
H3: Yellow pulse: Deco is resetting
If you notice a yellow pulse on your Deco device, it means that the device is currently resetting. This could be because you have pressed the reset button or there is a power interruption. During this time, the Deco is preparing to start up again and restore the default settings.
H3: Yellow solid: Deco is starting up
When the Deco device shows a yellow solid light, it indicates that the device is starting up. This is the initial stage of the setup process, where the Deco is initializing and getting ready to connect to your network. It’s important to wait patiently during this time and avoid interrupting the setup process.
H3: Blue pulse: Deco is ready for setup
The blue pulse on your Deco device means that it is ready for setup. This is the ideal LED status you should see when you are in the process of setting up your Deco device. During this time, the Deco is waiting for you to connect to it and proceed with the configuration process.
H3: Blue solid: Deco is setting up
Once you have connected to the Deco device and started the setup process, you will notice a blue solid light. This indicates that the Deco is currently setting up and configuring the necessary network settings. It’s important to let the Deco complete this process without interruption to ensure a successful setup.
H3: Green solid: Deco is registered
Finally, when you see a green solid light on your Deco device, it means that the device is registered and ready to provide you with a stable and secure Wi-Fi connection. This is the LED status you should see after the setup process is complete and everything is functioning as expected.
In conclusion, understanding the LED status lights of your Deco device is crucial for a smooth setup process. By knowing what each LED status signifies, you can easily troubleshoot any issues and ensure that your Deco device is up and running in no time.
Credit: www.ebay.com
Frequently Asked Questions Of Deco Blinking Blue
What Does It Mean If My Deco Is Flashing Blue?
The flashing blue light on your Deco means it is ready for setup. If you have already set it up successfully but it’s still flashing blue, there may be an issue. Make sure to refer to the setup guide for troubleshooting or contact customer support for assistance.
What Does The Flashing Blue Light Mean On Tp Link Router?
The flashing blue light on a TP-Link router means that it is ready for setup. It indicates that the router is waiting to pair with your devices. For more details on how to set up your TP-Link router, please refer to the provided link.
Why Is My Wifi Extender Blinking Blue?
The blinking blue light on your WiFi extender means it is searching for the analyzer. If it turns to a static green light, it means the extender is connected to the Wi-Fi. For more information, refer to the user manual or contact customer support.
How Do You Reset Deco?
To reset Deco, you can follow these steps: 1. Locate the reset button on the Deco device. 2. Use a small pin or paperclip to press and hold the reset button for about 5 seconds. 3. Release the reset button and wait for the Deco device to restart.
4. Your Deco is now reset and ready for setup.
Faq 1: What Does It Mean If My Deco Is Flashing Blue?
When the Deco is flashing blue, it indicates that it is ready for setup.
Conclusion
The blinking blue light on your Deco router indicates that it is ready for setup and waiting to pair with your devices. It is a signal that the device is searching for a connection and is prepared to establish one.
If you have just completed the setup process and the light continues to blink, there may be a problem. However, once the setup is complete, the light should remain solid. If you encounter any issues, refer to the manufacturer’s instructions for troubleshooting.